I wrote a review a few months ago for this tank. Couldn't figure out how to edit or modify the previous review, Lol.
Just wanted to come back & offer two words of advice.
1) I'm a HEAVY vaper & I've recently found that the older, larger, square shaped Kanger OCC coils work better for me at 1.2 ohms. Much more vapor & flavor versus those stupid little SSOC coils. The bigger coils fit just fine but seem to reduce liquid capacity a little bit. I saw a good video on YouTube on how to use a safety pin to create tiny little holes on the cotton on both sides to prevent dry burn hitting & improve wicking on the OCC coils. Works very well with this set up. Also, I KNOW the OCC coils work better because you can observe the air bubbles escape the cotton holes after a big hit & the air bubbles out of the OCC coil are 2x to 3x bigger than what comes out of the SSOC coils.
2) FINALLY figured how to completely disassemble this unit for weekly cleaning & GLASS REPLACEMENT: The top & the bottom are threaded into each other. They DO NOT pull apart. You have to unscrew the top fill cap off, remove the bottom part where the coil goes, then, grasp the top part & bottom part & twist in opposite directions. Even with this knowledge, it can be a chore!! You might be able to use some tools like an eyebrow tweezer to reach inside the tank & grab the top horizontal section but it's still a chore. Be careful!! You'll get it eventually. Maybe try letting it soak in warm water then completely dry it off & try again. Don't do it wet, you'll get blisters.
Still a very fun & clean (& 99% leak free tank) to play with. 5/5 & well worth the price.
Donna a
|
5/27/2016 1:14 AM
Was this review helpful?
Yes(0)