Obituary: Originally the idea of a Temperature Control (TC) capable coil for the Atlantis family (Aspire Atlantis/Triton, Eleaf Melo, etc...) was very appealing to us, and this coil was the first option available at the time.
Unfortunately the quality of this coil was not as good as the one from Aspire themselves (Aspire coil quality is,of course, very hard to beat). Moreover both Aspire and Eleaf now offer TC Coil compatible with the Atlantis/Triton family of atomizer:
Important: The VapeOnly vAir-T Atlantis coils are temperature control coils and should only be used with a temperature controlled device! The VapeOnly vAir-T Atlantis coils are the first temperature control coil for the famous Aspire Atlantis. The wick is made with 100% organic cotton. The VapeOnly vAir-T Atlantis coils is also the first to have an eLiquid flow control ring. With the VapeOnly vAir-T Atlantis coils - You are in control:
- air flow control (with the Atlantis)
- eLiquid control (with the coil)
- temperature control (with a temp. control device)
VapeOnly vAir-T Atlantis coils are for:
- Aspire Atlantis 2
- Therefore it also work with the Eleaf Melo
- And the new Aspire Triton
VS Comments: We have been testing many temperature control devices in 2015, to make sure the quality was good enough for our members. Because the technology is maturing, we are now seeing temperature control devices we like that we can offer our members. Therefore we are now also offering temperature control coils for the best atomizers to our members. Because the wick is made of Organic Cotton, make sure to prime the coil before using it.
- Pack of 5 temperature control atomizer heads (coil)
- Vertical Coils
- eLiquid Flow Control Ring
- Wattage: 10 to 80W
- Resistance: 0.25 Ohm
- Coil material: NI200
- Wick material: 100% organic cotton
- Unscrew the metal bottom cap from the tank.
- Unscrew the head from the bottom cap and replace with the new head.
- Refill with e-Liquid.
- Screw the bottom cap back on the tank.
- Wait a couple of minutes for the e-Liquid to feed the coil before vaping again.
As you may know already, most vaping products are being copied nowadays, these "clones" have become a major issue for the industry and they can be found everywhere. We have tested many competing websites in the USA and many of them (especially california based vendors and pretty much all eBay vendors) are selling Kanger and Aspire clones without telling their customers - this gives them an unfair competing advantage and is deceitful to their customers. Thankfully Aspire, Kanger and others have put in place a security authenticity code on their products to prevent counterfeiting. VapeShop strongly support this initiative and we hope that all manufacturers will implement a similar mechanism moving forward. VapeShop customers can be assured that if we ever sell a clone product it will be clearly labelled as such in the product name and its description.